background image

www.traxontechnologies.com

©2015 tRAxOn teCHnOLOGies - An OsRAM Business. ALL RiGHts ReseRved. tRAxOn™, tx COnneCt®, ARe tRAdeMARks Of tRAxOn teCHnOLOGies. u.s. pAtents, e.u. 
pAtents, jApAn pAtents, OtHeR pAtents pendinG. speCifiCAtiOns ARe suBjeCt tO CHAnGe witHOut nOtiCe.

installation Guide

06/15 v0.1

13 of 15

TeCHNICAL SPeCIFICATION

6.   

Cove Light AC HO RGB Graze

Light source:

9 / 36 High intensity power Leds

Color Range:

16.7 million additive RGB colors

Beam Angle:

50°x10°, 60°x30°

power input:

120v, 220-240v AC

power Consumption:

12.5w per 300mm (1ft)

weight:

0.55kg/1.2lbs; 2kg/4.4lbs;

Operating temperature:

–20°C to +45°C (–4°f to +113°f);

As with all electronic devices, Led output degrades over time - a term called lumen 
depreciation. this also explains why it is nearly impossible to expect photometric 
performances of two Led products with different service life spans to be the same. the 
rate of Led degradation is a complex function of many factors such as operating efficiency, 
duration of continuous operation, and operating conditions (e.g. ambient temperature).

Because Leds are semiconductor devices, their performances are subject to inherent 
variability commonly found in semiconductor industry. to improve consistency in performance 
across the same product, Led manufacturers “sort” Leds into bins according to different 
preset parameters, such as forward driving voltage, illumination, etc. whereas binning is a 
sorting function, it is not a correction process. inherent variability in the manufacturing process 
always results in different binning distributions according to different production lots. traxon 
uses automatically binned Leds on its products, thereby minimizing output variations within 
the model range. 

Содержание Cove Light AC HO-36 RGB Graze
















Отзывы: