Allegro Dot M/L
Mounting Guide
www.traxontechnologies.com
©2019 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Mounting Guide
09/19 V1.4
1 of 2
LED Engine mounts
on top of the Pixel Distributor
M4 × 8mm × 4
(Included)
(Not included)
M5 anchor bolts
(LED Engine is ordered
separately)
Mount Pixel Distributor
with connectors facing down
(M3 Screws not included)
Suggested alternative method
if M3 screws are not viable
(Cable ties not included)
CAUTION:
1. Always use the housing unit for mounting. Handle string with
care. Improper handling of lead cable and string will cause
damage.
2. Warning-This lighting chain must not be used without all
gaskets being in place.
Mounting the Allegro Dot M/L
Mounting the LED Engine and Pixel Distributor
Direct View
Diffused View
CAUTION:
1. The light source of this luminaire is not replaceable; when the light source reaches its end
of life the whole luminaire shall be replaced.
2. The length of the cable between the pixel distributor and the first lamp or lamp holder shall
not be less than 1.5m.
3. Do not connect the chain to the supply while it is in the packing.
Smart Junction
240mm/9.4”
2 x 4.2 x 8 slots
25mm/0.98”
97mm/3.8”
51mm/2”
33mm/1.3”
R2.1mm/0.08”
42mm/1.7”
Mounting the Smart Junction
Distributor Box
244.2mm/9.6”
224mm/8.8”
20mm/0.79”
9mm/0.35”
204mm/8”
Cable length: 300mm/11.8”
Cable length:
300mm/11.8”
Ø6.3mm/0.25” x 4
M4 x 4
68mm/2.7”
50mm/2”
70mm/2.8”
44mm/1.7”
52mm/2”
Ø60mm/2.4”
Ø3.9mm/0.15” x 2
68mm/2.8”
17mm/0.7”
15.1mm/0.6”
44mm/1.7”
52mm/2”
Ø60mm/2.4”
Ø3.9mm/0.15” x 2
68mm/2.8”
39mm/1.5”
15.1mm/0.6”
(M4 Screws not included)
This lighting chain can use for indoor and outdoor.
This class III lighting chains delivered without a supply source, please select the suitable power source.
Independent, constant voltage type, SELV DC 30 V output, the output power shall be not less than the
lighting chain’s power, short-circuited proof, IP67 or above (if the IP rating is below IP67, the luminaire
manufacturer shall provide adequate instructions for connection to the supply ensuring an equivalent
degree of protection against harmful ingress of dust and moisture as that provided by the luminaire, for
example, the PSU use indoors), which is/are EN/IEC 61347-1 and EN/IEC 61347-2-13 certified.
