Traxis DBS 3500, Руководство по эксплуатации

Страница: 15 / 23

Basic Operations
You can move the highlight from “satellite” to
“search” by pressing
Ch+/Ch- keys
1 In “Satellite” item, press / Volume - keys
to select satellite you want to scan. Otherwise,
press key OK to open the “satellite list” to select
directly.
2 In “Scan Mode” item, press / Volume -
keys to scan all channels or just free channels.
3 In “Scan channel” item, press / Volume
- keys to scans TV + Radio Channels, TV
channels or Radio channels.
4 In “Search” item, press OK key to start scanning.
The scanning screen will display like below.
(The lower part of the screen will display the
process and show the current scanning
channels.)
5 In the “Auto Scan” menu, press Exit key to exit
back from the scanning by saving the current
value.
4.3 TP Scan
When you enter “TP Scan” menu, it will display the
screen like below:
You can move the highlight from “satellite” to
“search” by pressing
Ch+/Ch- keys
1 In “Satellite” item, press / Volume - keys
to switch satellite that you want to scan.
Otherwise, press key OK to enter satellite list for
selection.
2 In “TP Index” item, you can use both /
Volume- keys in the screen to select
transponders.
²
In “TP Index” item, when you press key 1 , it
will display “New Carrier”; You should set the
parameters of “TP Frequency” and “Symbol
Rate” for this new transponder. The parameters
of “TP Frequency” and “Symbol Rate” can be set
by number keys or / Volume - keys to.
The available ranges are “3000~13000 MHz”
and “1000~45000Ks/s”.
²
When you press key 2 , it will show a
warning message for reminding whether you will
delete the current transponder or not. If you
select “Yes”, the current transponder will be
deleted, and the total account of transponders will
be reduced by 1 .
3 For the existing transponder, you can also use
number keys or / Volume - keys to
modify the parameters of “TP Frequency” and
“Symbol Rate”.
4 “Polarity” and “Scan Mode” are used for setting
scanning conditions, you can press /
14