Traxis DBS 3500, Руководство по эксплуатации

Страница: 14 / 23

Basic Operations
4.
Installation
How to enter “installation"menu:
Press key /Volume - to select "Installation”
from the menu page of “Channel”, "Installation” ,
“System setup” and “Tools”.
When you enter “Installation” menu, it will display the
screen like below:
1 Press Ch+/Ch- keys to select menu items among
Antenna, Setup, Auto Scan, TP Scan and Preset
Scan.
2 Press key OK to enter the selected item.
4.1 Antenna Setup
When you enter “Antenna Setup” menu, it will display
the screen like below:
In Antenna Setup mode:
1 Satellite: In this item, pressing keys V olume +/
Volume - will switch Satellites and pressing key
OK can enter satellite list for you to select
directly.
2 LNB Type: In this item, pressing V olume + / Volume
- keys will switch among “Standard”, “User” and
“Universal” mode.
For Example: If you use the Dual LNB, you should
select “User” option in “LNB Type” and set the
correct frequency in LNB Type, then the channel
will play normally
There are several frequencies for selection: 5150 /
5750 / 5950 / 9750 / 10050 / 10600 / 10700 /
10750 / 11300.
3 22K: You can use / Volume - keys to
switch “ON / Off”. When this item is switched to
“ON”, the receiver will receive TV and radio input
signal from 22K port. If the item is switched to
“Off”, the receiver will receive all signals from 0K
port.
4 DiSEqC: You can use / Volume - keys
to switch options between “DisEqC1.0” and
“DisEqC1.1”.
DiSEqC Switch: you can press / Volume -
to switch the options below:
²
Disable: without DiSEqC.
²
1/2, 2/2: two ports DiSEqC
²
1/4, 2/4, 3/4, 4/4: 4 ports DiSEqC
²
1/8, 2/8… 8/8: 8 ports DiSEqC
²
1/16, 2/16… .16/16: 16 ports DiSEqC
5 Positioner: In “Positioner” item, you can press
/ Volume - keys to switch “None /
DiSEqC 1.2 ” functions.
6 Polarity: In “Polarity” item, / Volume -
keys are used to switch “HV/ H / V” functions.
4.2 Auto Scan
When you enter “Auto Scan” menu, it will display the
screen like below:
13