2.
Attaching to the camera
-
10
-
-
11
-
Attach the speedlite
Slip the speedlite’s mounting foot into the camera’s hot shoe all the way.
Secure the speedlite
On the mounting foot,slide the lock lever to the right,When the lock lever clicks in place,it will be locked.
Detach the speedlite
While pressing the lock-release button,slide the lock lever to the left and detach the speedlite.
E
N
E
N
Ⅶ.
Basic functions
1.Power-on and Power-off
Power-on and Power-off: the power of the speedlite can be turned on by press to ON ,and turned off
by pressing to OFF.
Turn on the power of the speedlite, when (PILOT) turns red that the speedlite can flash.
If the charging is less, the flash will automatically shutdown, then you need to replace with new
batteries.
You can press the testing button (PILOT) to test whether the speedlite works normally, after use,
hold the power to OFF to power off.
2. Button/Dial Lock
By setting the power switch to (LOCK),you can turn off flash's button and dial operations.
Use this to against the flash function settings from being accidentally changed after you
set them.
3
.
M
You can set the flash output from 1/128 power to 1/1 full power in 1/3- stop increments. Use a
hand-held flash meter to determine the required flash output to obtain a correct flash exposure
Press the (MODE) button so that (M) displayed.
By choose setting and dial button to adjust flash luminance in 0.3EV increments.
Adjust the camera and press the shutter, the speedlite will flash with the synchronic signal of the
camera.
mode
