The use of external charging box
You can buy external charging boxes and connect it to the charging port of Speedlite, after flash,
the charging box will charge the speedlite.You can set C.Fn-00 to meet you higher need .
High-speed continuous shooting
The Speedlite can realize the high-speed continuous shooting function, please set the in the
continuous shooting form and then shoot. Please: The number of the photos that can be continuous
shot is releated with the output level .Please use the fully charged battery.
Ⅸ.
The advanced application
Reflection flash
Bounce flash means to take photos by making flash light
head aimed at wall or ceiling and using the light reflected
back from the ceiling or wall to light the desired object,so
that the shade behind the object can be decreased to get
more natural shooting effect .If the wall or ceiling is too far ,
the bounce flash may be too weak to get enough exposure .
The wall or ceiling should be even and white in order to get
efficient reflection ;if the reflection surface is not white ,
color cast may appear in photo.
-
22
-
-
23
-
E
N
E
N
Set S1/S2 mode
S1 Mode:
When the flash is in S1 mode, it will work with the first work of the master flash
synchronously, with the result consistent with the use of radio slave, To use this mode correctly,
the master flash should be set at manual flash and TTL flash system with preflightfunction and
the red-reduction function with multiple flashes should not be used .
S2 Mode:
It is also called“pre-flash cancel mode”. This mode is similar with S1mode,but it can
neglect the pre-flash given by TTL flash .Therefore ,it can support the main flash working in TTL
mode. In particular, if S1 mode cannot flash correctly and synchronically with your internal flash,
you can try to use S2 mode.The following situation shall be avoided when the S1 and S2 modes
are used: the red eye reduction function of the main light is used;the order mode(Nikon) or
wireless mode(Canon) of the master is used ;the ST-E2 is used as the flash controller.
By pressing the < >button to chose S1 or S2 ,that is S1 or S2 mode. These twomodes are suitable
to be used as off-camera auxiliary light, so as to create a variety of lighting effects. They are suitable
for manual flash environment and TTL flash environment respectively .Under these two modes, the
way to adjust the output level is like that in M mode.
