Travis Industries Xtrordinair 44 Elite, Руководство пользователя

Страница: 58 / 158

For Usable Firebox Volumes above 3.0 ft
3
- Low and Medium Fire
Nominal Required Load Density (wet basis) 12
lb/ft
3
Usable Firebox Volume 4.20 ft
3
Total Nom. Load Wt. Target 50.4 lb
Total Load Wt. Allowable Range 47.88 to 52.92 lb
Core Target Wt. Allowable Range 22.68 to 32.76 lb
Remainder Load Wt. Allowable Range 17.64 to 27.72 lb
Mid-Point
Core Load Fuel Pc. Wt. Allowable Range 7.56 to 12.60 lb 10.08
Remainder Load Pc. Wt. Allowable Range 5.04 to 10.08 lb 7.56 Fuel Piece Moisture Reading (%-dry basis)
Pc. # 1 2 3 Ave.
Core Load Piece Wt. Actual 1 7.60 lb In Range 27.6 21.5 27.7 25.6 In Range 6.05 lb 2.74 kg
2 7.60 lb In Range 24.8 24 27.4 25.4 In Range 6.06 lb 2.75 kg
3 8.10 lb In Range 20.3 20.8 19.5 20.2 In Range 6.74 lb 3.06 kg
Core Load Total. Wt. Actual 23.30 lb In Range
Pc. #
Remainder Load Piece Wt. 1 8.90 lb In Range 21.1 21.3 18.3 20.2 In Range 7.40 lb 3.36 kg
(3 or 4 Pcs.) 2 5.90 lb In Range 28 23.3 20.2 23.8 In Range 4.76 lb 2.16 kg
3 5.10 lb In Range 18 19.1 19.2 18.8 In Range 4.29 lb 1.95 kg
4 5.50 lb In Range 19.7 18 20.5 19.4 In Range 4.61 lb 2.09 kg
Remainder Load Piece Weight Ratio - Small/Large 57% In Range ≤ 67% Total Load Ave. MC % (dry basis) 22.0 In Range
Remainder Load Tot. Wt. Act 25.40 lb In Range Total Load Ave. MC % (wet basis) 18.0
Total Load Wt. Actual 48.70 lb In Range Total Test Load Weight (dry basis) 39.92 lb 18.11 kg
Core % of Total Wt. 48% In Range 45-65% Total Fuel Weight Burned During Test Run (dry basis) 39.9 lb 18.11 kg
Remainder % of Total Wt. 52% In Range 35-55%
Actual Load % of Nominal Target 97% In Range 95-105%
Actual Fuel Load Density 11.6 lb/ft
3
Allowable Charcoal Bed Wt. Range (lb) 4.9 to 9.7 Mid-Point
Actual Charcoal Bed Wt. 5.3 lb In Range 7.3
Actual Fuel Load Ending Wt. 0.0 lb Valid Test ≥ 90%
Total Wt. of Fuel Burned During Test Run lb. 48.7 lb
Pc. Wt. Dry Basis
THIS DOCUMENT IS NOT AN ASTM STANDARD; IT IS UNDER CONSIDERATION WITHIN AN ASTM
TECHNICAL COMMITTEE BUT HAS NOT RECEIVED ALL APPROVALS REQUIRED TO BECOME AN ASTM STANDARD.
IT SHALL NOT BE REPRODUCED OR CIRCULATED OR QUOTED, IN WHOLE OR IN PART, OUTSIDE OF ASTM
COMMITTEE ACTIVITIES EXCEPT WITH THE APPROVAL OF THE CHAIRMAN OF THE COMMITTEE HAVING
JURISDICTION AND THE PRESIDENT OF THE SOCIETY.
COPYRIGHT ASTM, 100 BARR HARBOR DRIVE, WEST
5
CONSHOHOCKEN, PA 19428. ALL RIGHTS RESERVED .
58 of 158