![Travis Industries Xtrordinair 44 Elite Скачать руководство пользователя страница 136](http://html.mh-extra.com/html/travis-industries/xtrordinair-44-elite/xtrordinair-44-elite_manual_1154150136.webp)
6
Operation
Travis Industries
10/24/2018 - 93508094
44 Elite Owner’s
Safety Notice:
• If this appliance is not properly installed, a house fire may result. For your
safety, follow the installation directions. Contact local building or fire
officials about restrictions and installation inspection requirements in your
area.
• Read and follow all of the warnings on pages 2 and 3 of this manual.
Before Your First Fire
Clean Any Gold Surfaces
If you have an optional gold face,
clean the surface prior to starting
the fireplace. Any marks left on the
gold may become etched-in by the
heat of the fireplace. Use
denatured alcohol and a soft cloth
to clean.
Denatured
Alcohol
Soft Cloth
Verify the Installation
Before starting the fireplace, verify that the fireplace is properly installed and all of the requirements in
the
44 Elite-ZC Installation Manual
have been followed.
Keep all flammables 36" away from the front of the fireplace (drapes, furniture, clothing, etc.).
Do not use a fireplace insert or other products not specified for use in this fireplace.
Curing the Paint
Follow the steps below to cure the paint (first fire):
a) Open doors and windows in the room to ventilate the heater during
the curing process.
b) Vacate the room. The fumes from the initial heating process are
non-toxic but may be unpleasant.
c) Slowly bring the heater to a medium burn (400°F/204°C) for 45
minutes. Then increase the burn temperature to a hot burn
(600°F/315°C) for an additional 45 minutes. This will cure the paint.
Door Gasket
- The door gasket can adhere to the paint on the front of
the heater. To prevent this, carefully open and close the door a few
times during the paint curing process.
2 to 4 hours
Carbon Monoxide (CO) Emissions
Smoke from wood heaters contain CO. This gas is an indication of incomplete combustion and is
detrimental to the environment and to your health. The more visible the smoke, the higher the CO
levels. Burning dry wood is the most significant step you can take to reduce CO emissions. It is also
important to understand the combustion process so you can burn your heater efficiently. Read the
manual thoroughly so that you can operate your heater in the most efficient and clean manner
possible.
136 of 158
Содержание Xtrordinair 44 Elite
