P
AGE
16
F
INALIZING THE
I
NSTALLATION
(
CONT
.) -
For qualified installers only!
4
Install the door (see the illustration below).
Remove the four screws in the door
frame with a 5/16Ó socket wrench.
Attach the mounting angle to the door
with two of the screws. Make sure the
angle butts up against the outside edge
of the door frame.
b
Remove the hinge plate (and hinge pins) from
the heater. Attach the hinge plate to the door
frame with the two remaining screws. Make
sure the plate butts up against the outside edge
of the door frame.
a
Place the door face
down on a
non-scratching
surface.
c
5/16Ó Socket
Wrench
AAAAAA
AAAAAA
AAAAAA
AAAAAA
AAAAAA
AAAAAA
AAAAAA
Insert the
hinge pins
into the
hinges on
the heater.
e
f
Swing the door to the left,
lifting slightly on the door
handle. The door latch
plate on the heater inserts
into the slot on the
mounting angle. If the
door does not secure to
the heater, adjust the door
latch plate up or down to
ensure proper latching.
Insert the hinge pins
into hinge plate.
d
g
Attach the handle to the
door using the T-nut.
When tight, the handle
should be pointing down.
Door Latch Plate
5
Turn on gas to the heater. Leak test all gas joints prior to starting the appliance. Start the pilot. Start
the main burner. Leak test all gas joints again.
