3 0
Operation
© Travis Industries
4041213
1 0 0 - 0 1 1 5 2
Starting The Pilot Flame
The pilot flame is required to ignite the main
burners (it also plays a safety role). It should be
left on once lit. It will stay lit unless the gas control
valve is turned to "OFF". However, the pilot will
go out if the gas is shut off, the propane tank runs
out (or low) or if the stove malfunctions. If the pilot
turns off frequently, call your dealer for
information. To start the pilot follow the directions
below:
WARNING
:
When lighting or re-lighting the pilot, the
glass must be removed (see page 25).
a
Remove the glass (see page 25 for details).
b
Push the gas control knob in slightly and turn it
to the "OFF" position. The knob will not turn
from "ON" to "OFF" unless the knob is
depressed slightly. Wait five minutes to let any
gas that may have accumulated inside the
firebox escape. If you smell leaking gas, follow
the directions on the cover "IF YOU SMELL
GAS".
c
Turn the gas control knob to the "PILOT"
position and press the knob in, this will allow gas
to flow to the pilot light. Press the button on the
pilot igniter repeatedly until you see the pilot
light.
WARNING:
If the pilot does not light after 15
seconds, release the knob and call
your dealer for service. Do not attempt
to light pilot until service has been
performed.
N O T E :
You may wish to remove the log set to
gain a better view of the pilot (see
page 26).
d
Keep the gas control knob depressed for 30
seconds once it is lit.
e
Release the gas control knob. If the pilot goes
out, repeat step C. If the pilot refuses to stay lit,
call your dealer for service. With the pilot lit,
proceed to step “f”.
f
Replace the glass.
g
Turn the gas control knob counter-clockwise to
"ON". The pilot is now lit and the heater can be
turned on and off.
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
?
AAA
AA
AA
A
A
A
A
30 seconds
PILOT
IGNITER
a
b
AAA
AAA
A
A
A
A
A
A
5 minutes
c
d
e
f
g
