Operation
2 9
© Travis Industries
4041213
1 0 0 - 0 1 1 5 2
Before You Begin
•
Read this entire manual before you use your new fireplace (especially the section "Safety
Precautions" on pages 4 & 5). Failure to follow the instructions may result in property damage, bodily
injury, or even death.
Location of Controls - See explanation below
Gas Control Knob
Flame Adjust Knob
Gas
Control
Valve
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
AAAAAAA
Swing the control cover down
to access the gas control valve,
igniter, and blower control.
Blower Knob
BLOWER
PILOT
IGNITER
Pilot Igniter
ON/OFF Switch
The Pilot Flame can be found below
the back log on the left side.
ON
OFF
MAIN BURNER
Blower Knob
This knob controls the speed of the internal convection blower that pushes
the heated air into the room.
On/Off Switch
This control is used to turn the fireplace on and off.
Pilot Igniter
The pilot igniter is used only to start the pilot. When pressed, it sends an
electrical charge to the pilot assembly. This creates a blue spark directly next
to the pilot, igniting the pilot flame.
Gas Control Knob
This knob is used to control gas to the fireplace and for starting the pilot.
There are three positions, ON, OFF, & PILOT. The pointer to the left of the
knob indicates the position this knob is in.
Flame Adjust Knob This knob controls the flame height from low ("LO") to high ("HI"). The pointer
above the knob points to the position this knob is in.
