Tranzeo TR-49 Series, Руководство пользователя

Страница: 80 / 92

888
This document is intended for Public Distribution
19473 Fraser Way,
Pitt Meadows, B.C. Canada V3Y 2V4
Appendix J
J-8
TR-49 Series
Tranzeo Wireless Technologies
net.router.dhcp_server.dns1 = 0.0.0.0 # [IP]
net.router.dhcp_server.dns2 = 0.0.0.0 # [IP]
net.router.dhcp_server.dns_relay_enabled = Yes # [Yes | No]
net.router.dhcp_server.domain_use_wan_assigned = No # [Yes | No]
net.router.dhcp_server.domain_name = localdomain
# [STRING.59]
net.router.dhcp_server.wins_use_wan_assigned = No # [Yes | No]
net.router.dhcp_server.wins1 = 0.0.0.0 # [IP]
net.router.dhcp_server.wins2 = 0.0.0.0 # [IP]
# --------------------
# net.router.qos.
# --------------------
net.router.qos.enabled = No
# [Yes | No]
net.router.qos.uplink_speed = 4096 # [INT.0-65535] unit:Kbps
net.router.qos.auto_classify = Yes # [Yes | No]
net.router.qos.dynamic_fragmentation = Yes # [Yes | No]
; entries 0-7
net.router.qos.actived.0 = No
# [Yes | No]
net.router.qos.priority.0 = 0 # [INT.0-255]
net.router.qos.name.0 = "" # [STRING.15]
net.router.qos.protocol.0 = 0 # [INT.0-255]
net.router.qos.source_ip_start.0 = 0.0.0.0 # [IP]
net.router.qos.source_ip_end.0 = 0.0.0.0 # [IP]
net.router.qos.source_port_start.0 = 0 # [0-65535]
net.router.qos.source_port_end.0 = 0 # [0-65535]
net.router.qos.destination_ip_start.0 = 0.0.0.0 # [IP]
net.router.qos.destination_ip_end.0 = 0.0.0.0 # [IP]
net.router.qos.destination_port_start.0 = 0 # [0-65535]
net.router.qos.destination_port_end.0 = 0 # [0-65535]
# --------------------
# net.router.pppoe.
# --------------------
net.router.pppoe.service_name = ""
# [STRING.15]
net.router.pppoe.username = "" # [STRING.40]
net.router.pppoe.password = "" # [STRING.15]
net.router.pppoe.ip_address = 0.0.0.0 # [IP]
net.router.pppoe.subnet_mask = 0.0.0.0 # [IP]
net.router.pppoe.gateway = 0.0.0.0 # [IP]
net.router.pppoe.dns1 = 0.0.0.0 # [IP]
net.router.pppoe.dns2 = 0.0.0.0 # [IP]
net.router.pppoe.max_idle_time = 0 # [INT.0-65535] unit:minute
net.router.pppoe.reconnect_mode = Demand # [Always | Demand | Manual]
net.router.pppoe.user_settings_enabled = No # [Yes | No]
# --------------------
# wireless.
# --------------------
wireless.mode = CPE
# [AP | CPE]
wireless.ssid = default # [STRING.32]
wireless.secondary_ssid = "" # [STRING.32]
wireless.channel = 50 # [INT.0-255]
wireless.channel_bandwidth = Full # [Full | Half | Quarter]
wireless.gmode_enabled = No # [Yes | No]
wireless.indoor_mode = Yes # [Yes | No]
wireless.turbo = No # [Yes | No]