Tranzeo TR-49 Series Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 92

background image

333
This document is intended for Public Distribution
19473 Fraser Way,

Pitt Meadows, B.C. Canada V3Y 2V4

Appendix J

J-3

TR-49 Series

Tranzeo Wireless Technologies

ii. Specify IP address of TFTP server (Optional if DHCP server

specifies TFTP server in “next server”. Consult your DHCP Server’s
documentation for more information about how to set this option)

iii. Specify filename of configuration file. The file must be in the correct

location for the TFTP server. Consult the TFTP server’s
documentation for information about how to configure the TFTP
server.

iv. Click “Apply & Reboot”

•

Step 1: Start auto configuration

The unit boots up in auto configuration mode when the auto configuration flag
in flash memory is set. The flag is set as default OFF, and can be set to on via
either the HTTP interface or via an SNMP Set. In auto configuration mode, the
LEDs on the unit are arranged to work in a different way. The power LED is
always blinking to indicate the unit is in the special mode.

•

Step 2: Link Ethernet

The Ethernet ports are initialized with the radio’s MAC address. The Ethernet
LED shows if the units is linked or not. The radio is always turned off in auto
configuration mode.

•

Step 3: Obtain IP address

After the Ethernet connection is established, the DHCP request will be sent
out continually until obtaining an IP address. The signal1 LED will blink to
indicate that the DHCP request is being sent out. When a DHCP offer is
received, the signal1 LED turns solid.

•

Step 4: Connect TFTP server

The unit connects TFTP server using the IP address set in the configuration.
The signal2 LED will blink to indicate that it is trying to establish a connection
with the TFTP server. When it is connected, the LED turns solid and the unit
starts to download the configuration file (named as <MAC_ADDRESS>.cfg)
from the server.

•

Step 5: Download and parse configuration file

The signal3 LED blinks to indicate that it is downloading and parsing the
configuration file from the TFTP server. The file must be in the correct format
(see the attached sample file). There is only a basic validation for parsing the
file. The incorrect values or fields in the file will be ignored.

•

Step 6: Store and reboot

The values in the configuration file will be stored into the unit. Signal LED 3-5
turns on for a second, and the unit starts to reboot into the regular mode.

«
...
73
74
75
76
77
...
»

Содержание TR-49 Series





























































































Отзывы:

Нет отзывов

Похожие инструкции для TR-49 Series

Бренд: Icom Страницы: 6

Бренд: HoMedics Страницы: 10

Бренд: switel Страницы: 76

Бренд: Audiovox Страницы: 32

Бренд: Tait Страницы: 74

Бренд: Benthos Страницы: 68

Бренд: Hyundai Страницы: 28

Бренд: JRC Страницы: 4

Бренд: Dared Страницы: 6

Бренд: KYL Страницы: 6

Бренд: Garmin Страницы: 6

Бренд: Garmin Страницы: 37

Бренд: Garmin Страницы: 45

Бренд: Tait Страницы: 120

Бренд: Motorola Страницы: 166

PalmLink KX-TR320CF

Бренд: Panasonic Страницы: 8

Бренд: Sony Страницы: 2

Sports Walkman SRF-87

Бренд: Sony Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды