P
RODUCT OVERVIEW
Page 12
CineMonitor
HD
3DView RF
Rotating knob
The menu knob is a rotating encoder with a push function. It is used to access and navigate in the
menus, adjust some parameter values, validate and exit functions by turning or pushing it.
One sort press on the knob gives access to the menu. Rotating the knob enables to navigate
between the menu items. Pushing the knob gives access to the sub menu of the highlighted menu
item.
Selecting EXIT exits from the current menu level to the previous (if any). A long push on the knob exits
from the menu. Exiting the menu is also possible by automatic temporization, adjustable in MENU /
TECHNICAL.
Wireless Specificity
In wireless mode, the CineMonitorHD 3DView RF must be associated to a Transvideo TitanHD Tx. No
other wireless system can work with the CineMonitorHD 3DView RF.
A LINK menu is available when WIRELESS RECEIVER input is selected. It gives access to the
wireless settings.
Two wireless modes are available: Broadcast and P2P. Both CineMonitorHD 3DView RF and TitanHD
Tx have to use the same mode.
In P2P mode, the link is possible only between the paired transmitter and receiver.
The Broadcast mode allows to connect up to 6 receivers (CineMonitorHD 3DView RF and/or TitanHD
Rx) to one transmitter (TitanHD Tx). Each receiver must be paired to the transmitter.
Fore more information about pairing operation, see the next section "Module Association".
3D Specificity
The 3D menu is available only when WIRELESS 3D input is selected.
The measurement tools display the 2 signals analysis simultaneously. Each spot uses a specific color
(adjustable in MENU / 3D / COLOR).
About Wireless inputs
WIRELESS RECEIVER input displays the image that the transmitter carriers:
- in case of 3D video source, WIRELESS RECEIVER input displays a side by side image
- in case of 2D video source, WIRELESS RECEIVER input displays the 2D picture
WIRELESS 3D input only accepts 3D side by side signals carried by a TitanHD Tx 3DView
