05. Toll Access Code
It is the first dialing digit that will be checked as an effective Toll Call or not. This has no effect on toll control within the
system. It is only used to notify SMDR that a call is Toll Call or not. Refer to Program 14-01-03. Record Local Calls.
The Toll Access Code can be any one digit (0,1,2,3,4,5,6,7,8,9).
06. Station Numbering Plan
This parameter assigns the number of digits used for the station numbering plan. 2, 3, or 4 digits may be used.
IP \ Value
2
3
4
05-03-06
2 Digits
3 Digits
4 digits
07. Internal Dial Tone Pattern
System will provide different Dial tone to Analog phone when it is off hook to notifying its status. There are four
different situations which can be identified as follows:
Intercom:
Normal situation without setting to DND, CFW or MW.
DND:
Do Not Disturb.
CFWD:
Call Forwarding
MW:
Message Waiting (Some left message on the phone).
There are three different Dial Tone patterns:
Steady:
Continuous Dial Tone
2-Burst:
(Stutter Dial Tone): 250ms on / 250ms off / 250ms on / 1250ms off
3-Burst:
250ms on / 250ms off / 250ms on /250ms off / 250ms on / 750ms off
Notes:
1) If the parameter is set to 0 or 1 then the analog phone will receive the 2-Burst tone if call forward or DND has been
set for that extension.
2) Value 2 (and 6) is particularly designed for use when there is an external Voice Mail system connected to the
system, as some Voice mail units have problems with interrupted dial tone.
3) Value 6 will also provide what is known as Stutter dial tone to extensions when they are left a message. This is
useful where phones do not have a message light. When this is enabled as well as MW light to handsets by other
methods the phones with messages will receive both Message light and stutter dial tone.
IP
Value
Intercom
DND
CFWD
MW
05-03-07
0
Steady
3-Burst
3-Burst
Steady
05-03-07
1
2-Burst
3-Burst
3-Burst
2-Burst
05-03-07
2
Steady
Steady
Steady
Steady
05-03-07
3
2-Burst
2-Burst
2-Burst
2-Burst
05-03-07
4
Steady
3-Burst
3-Burst
2-Burst
05-03-07
5
2-Burst
3-Burst
3-Burst
Steady
05-03-07
6
Steady
Steady
Steady
2-Burst
05-03-07
7
2-Burst
2-Burst
2-Burst
Steady
08. Door Phone Ring Pattern
This parameter allows for different ring patterns when the Door Phone button is pressed. This Parameter will also
affect the ACP phone. If this mode is set to = 0 then the ACP will follow the extension ringing frequency otherwise it
will follow settings in this Mode. This allows stations that to distinguish a call from an ACP/Doorphone from other calls.
IP \ Value
0
1-8
9
05-03-08
Continuous ring
Same Ringing - 1 to 8 as DK handset
Background Music
(Program 05-08-08)
Содержание G1E Plus
