ABOUT BLOOD PRESSURE
TROUBLE SHOOTING
24
25
Why does my blood pressure fluctuate
throughout the day?
Is the result the same
if measuring on the
right arm?
Why do I get different
blood pressure at home
compared to the hospital?
1. Individual blood pressure varies mul�ple
�mes everyday. It is also affected by the way
you �e your cuff and your measurement
posi�on, so please take the measurement
under the same condi�ons.
2. If the person takes medicine, the pressure
will vary more.
3. Wait at least 3 minutes for another
measurement.
The blood pressure is different even
throughout the day due to weather,
emo�on, exercise etc. Also, there is the
“white coat” effect, which means blood
pressure usually increases in clinical
se�ngs.
It is ok for both arms, but there will be
some different results for different
people. We suggest you measure the
same arm every �me.
What you need to pay a�en�on to
when you measure your blood
pressure at home:
If the cuff is �ed properly.
If the cuff is too �ght or too loose.
If the cuff is �ed on the upper arm.
If you feel anxious.
Taking 2-3 deep breaths before
beginning will be be�er for
measuring.
Advice: Relax yourself for 4-5 minutes
un�l you calm down.
ST
AR
T
ST
OP
ST
AR
T
ST
OP
If any abnormality arises during use, please check the following points:
PROBLEM
SYMPTOM
CHECK THIS
REMEDY
No power
Low
batteries
Error
message
Display will
not light up.
Ba�eries are exhausted.
Replace with new ba�eries.
Insert the ba�eries
correctly.
Replace with new ba�eries.
Ba�eries are inserted
incorrectly.
Display is dim or
shows
Ba�eries are low.
E 01 shows
E 03 shows
E 04 shows
The measurement
failed.
AC adapter is inserted
instruc�ons below.
Insert the AC adapter
�ghtly.
E 02 shows
Incorrect cuff
placement or cuff air
plug is loose
Refasten the cuff and insert
air tube plug correctly then
measure again.
Hand shaking or talking
or weak Pulse during
measuring.
Relax for 5 minutes. and
then keep s�ll, measure
again.
Relax for 5 minutes and
measure again.
Pulse signal is not
detected during
measuring.
Loosen the clothing on the
arm and then measure
again.
Warning
message
Relax for a moment.
Refasten the cuff and then
measure again. If the
problem persists, contact
your physician.
“OUt” shows
Out of measurement
range
NOTE: If the product s�ll does not work, contact Transtek Customer Service. Under
no circumstance should you disassemble or a�empt to repair the unit by yourself.
Hardware error.
(X can be some digital
symbol,such as 1, 2,
etc.)
EEx or E2x,
shows on
the display.
Retake the measurement.
If the problem persists,
contact the retailer
or
ourcustomer service
department for further
assistance. Refer to the
warranty for contact
informa�on and return.
