29
28
ABOUT BLOOD PRESSURE
TROUBLESHOOTING
Why does my blood pressure fluctuate throughout the day?
1. Individual blood pressure varies multiple times everyday. It is also
affected by the way you tie your cuff and your measurement position, so
please take the measurement under the same conditions.
2.If the person takes medicine, the pressure will vary more.
3.Wait at least 3 minutes for another measurement.
Why do I get a different blood
pressure at home compared
to the hospital?
The blood pressure is different even throughout the day
due to weather, emotion, exercise etc, Also, there is the
“white coat” effect, which means blood pressure usually
increases in clinical settings.
What you need to pay attention
to when you measure your blood
pressure at home:
If the cuff is tied properly.
If the cuff is too tight or too loose.
If the cuff is tied on the wrist.
If you feel anxious.
Taking 2-3 deep breaths before
beginning will be better for
measuring.
Advice: Relax yourself for 4-5
minutes until you calm down.
Is the result the same if
measuring on the right
wrist?
It is ok for both wrists, but there will be
some different results for different
people. We suggest you measure the
same wrist every time.
The cuff is not secure.
Refasten the cuff and then
measure again.
This section includes a list of error messages and frequently asked questions for
problems you may encounter with your blood pressure monitor. If the product is not
operating as you think it should, check here before arranging for servicing.
PROBLEM SYMPTOM CHECK THIS
REMEDY
No power
Low
batteries
Error
message
Display is dim or
will not light up.
Batteries are exhausted.
Replace with new batteries
Insert the batteries correctly
Replace with new batteries
Batteries are inserted
incorrectly.
Show on
the display Batteries are low.
E 1 shows
E 2 shows
The cuff is very tight
Refasten the cuff and then measure again.
E 3 shows
E 10 or
E 11 shows
movement can affect the measurement.
Relax for a moment and then measure
again.
E 20 shows
E 21 shows
Relax for a moment and then measure again.
The measurement process
does not detect the pulse
signal.
Loosen the clothing on the arm and then
measure again.
The monitor detected motion,
talking,or the pulse is too poor
while measuring.
The treatment of the
measurement failed.
The cuff is not secure.
Readjust the cuff and relax for a moment
and then measure again.
