23
22
SET
DATA MANAGEMENT
DATA MANAGEMENT
If you did not get the correct measurement, you can delete all
results by following steps below.
Delete the Records
3.If there is no record, the
right display will be shown.
Note: To exit out of delete mode
without deleting any records,
press START/STOP button
before pressing "MEM" to confirm
any delete commands.
1.
2.Press “MEM” to confirm
deleting , the LCD displays
“ dEL donE” and the monitor
will turn off.
Hold pressing “MEM” button for
3 seconds when the monitor is
in the memory recall mode, the
“dEL All” will flash on the display.
