If the User ID had set the profile, it will display the personal profile. Then the LCD will
display “ ” and “ ” alternately, you may start measuring.
Fast Measurement
If the User ID had’t set the profile, the LCD will display as the following picture, then
turn off.
12
Start Measuring
With original SENSE ON patent technology, LS202-B1 will switch on as you step
on the platform barefooted.
If it fails to identify the possible User ID, the LCD will only display the weight data.
(
To find out the solutions, please refer to Troubleshooting for more details.
)
When your scale is successfully paired with your smartphone and the Bluetooth is ON,
LS202-B1 will process data transmission instead.
(
Please refer to Data Transmission for more details.
)
Daily Measurement
Stand still and keep full contact with the conductors until the LCD stops displaying
moving “ ”.
13
Start Measuring
According to the analysis results, the system will automatically identify the possible
User ID with most similar history records. Then the measuring results will be
displayed sequentially four times and then turn off.
When the system finds out two or more users with similar history records, the User
ID will be displayed alternately,for example, U1 and U2,you may touch or key
to select the relative user,then touch “SET” key to confirm. The measuring results
will then be sorted into the User ID you selected and displayed sequentially four
times and then turn off.
With batteries correctly installed, press “SET” key to turn on the scale, and the LCD
displays 0.0, then you may touch the function key or to select the User ID.
Note: Select the “ ” means the settings of the current user won’t be deleted, and the
system will divert to personal profile setting.
Select the “ ” means the settings of the current user will be deleted, and the
scale will turn off.
Clear Your Profile
When the User ID had set up and saved the profile, touch and hold “SET” key to enter
setting interface.
If you touch “SET” key again, the LCD will display as the following picture, the letter “n”
blinks. The operator may touch the function key or to select “ ” or “ ”.
Touch “SET” key to confirm.
