* Be careful to strangulation due to cables and hoses, particularly
due to excessive length.
* At least 30 min required for ME equipment to warm from the
minimum storage temperature between uses until it is ready for
intended use. At least 30 min required for ME equipment to cool
from the maximum storage temperature between uses until it is
ready for intended use.
* This equipment needs to be installed and put into service in
accordance with the information provided in the
ACCOMPANYING DOCUMENTS;
* Wireless communications equipment such as wireless home
network devices, mobile phones, cordless telephones and their
base stations, walkie-talkies can affect this equipment and
should be kept at least a distance d away from the equipment.
The distanced is caculated by the MANUFACTURER from
the 80 MHz to 5.8 GHz column of Table 4 and Table 9 of
IEC 60601-1-2:2014,as appropriate.
* Please use ACCESSORIES and detachable partes specified/
authorised by MANUFACTURE.
Otherwise, it may cause damage to the unit or danger to the
user/patients.
* There is no luer lock connectors are used in the construction of
tubing, there is a possibility that they might be inadvertently
connected to intravascular fluid systems, allowing air to be
pumped into a blood vessel.
* Please use the device under the environment which was provided in
the user manual. Otherwise, the performance and lifetime of the
device will be impacted and reduced.
CAUTION
* This device is intended for adult use in homes only.
* The device is not suitable for use on neonatal patients, pregnant
women,patients with implanted, electronical devices, patients with
pre-eclampsia, premature ventricular beats, atrial fibrillation,
peripheral, arterial disease and patients undergoing intravascular
therapy or arterio-venous shunt or people who received a
mastectomy.
Please consult your doctor prior to using the unit if you suffer from
illnesses.
* The device is not suitable for measuring the blood pressure of
children. Ask your doctor before using it on older children.
28
29
SAFETY INFORMATION
SAFETY INFORMATION
Safety Information
Symbol for “THE OPERATION GUIDE MUST BE READ”
Symbol for “MANUFACTURER”
Symbol for “SERIAL NUMBER”
Symbol for “TYPE BF APPLIED PARTS”
Symbol for “DIRECT CURRENT”
Symbol for “ENVIRONMENT PROTECTION - Electrical
waste products should not be disposed of with
household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling
advice”
Symbol for “MANUFACTURE DATE”
Caution: These notes must be observed to prevent any
damage to the device.
SN
The Green Dot is the license symbol of a European
network of industry-funded systems for recycling the
packaging materials of consumer goods.
Symbol for “RECYCLE”
The signs below might be in the user manual,labeling or other
component.
They are the requirement of standard and using.
