background image

1800  816  277

www.tti.com.au

6

Product HandBook

GlidePath

Description

The TTi GlidePath Spray Trailer is designed to carry and distribute herbicides or pesticides using an integral 
pump and various fluid dispensing systems.  The GlidePath is available with the following options  

• 

8m, 10m or 12m Pinnacle Self-leveling Boom:

• 

30m hose on hose reel with spray gun

• 

50m auto-rewind SuperReel with spray gun

• 

Electric start for the Honda engine

• 

Double-sided foam marker kit with solenoid control

• 

TeeJet Matrix 430 GPS Guidance System

• 

Remote control solenoid operated ON-OFF switch unit

• 

Remote control solenoid operated 3-way regulator and ON-OFF switch unit

The GlidePath has the following features, refer to Figure 1.

Figure 1 – Component Identification – GlidePath with hose reel, boom and foam marker kit options

Pump

The GlidePath is fitted with a Bertolini 75L/min pump driven directly by a Honda GX200 petrol engine.  If the 
optional spray boom or spray gun is not in operation when the pump is running, the fluid bypasses back into 
the tank.

8m, 10m and 12m Pinnacle Self-leveling Booms

The Pinnacle galvanised boom has steel plate protected non-drip nozzles fitted with TeeJet AIXR Air Induction 
spray tips.  The boom incorporates a break-away feature to prevent damage if the unit hits an obstacle, and 
easily folds for transportation and storage.  The boom structure incorporates a self-leveling mechanism to 
take into account uneven terrain.  From the driver’s seat, the operator can start and stop spray operations 
using the optional electrically operated solenoid valve on the 3-way regulator.

Содержание GlidePath





























Отзывы: