1800 816 277
www.tti.com.au
13
Product HandBook
GlidePath
™
The GlidePath’s tank is filled as follows:
NOTE! Ensure the manually operated isolating valve for the boom is CLOSED.
•
Check that the boom’s manual isolating valve is CLOSED, or the optional electrically controlled solenoid
valve is OFF.
•
Open the tank filler by twisting and lifting the cap.
•
Withdraw the internal basket strainer and inspect it for any debris. Clean it if required and reinstall it into
the top of the tank.
•
Follow the chemical manufacturer’s instructions and safety precautions carefully, taking note of the order
in which the products are to be added to the tank.
•
Measure the correct quantities of chemicals using clean measuring containers specifically for this purpose
only, then add the chemicals to the tank.
•
Rinse out the measuring containers and any empty containers and pour all rinsing liquid into the GlidePath
tank.
CAUTION! Do not overfill the tank. This may result in chemical spillage.
CAUTION! The GlidePath must never be left unattended while being filled with fluid.
•
Top up the tank with water to the required level, ensuring it is not overfilled.
•
Thoroughly mix the contents by stirring with a suitable paddle or starting the pump to allow recirculation
through the pump and back into the tank. Ensure the hose operation lever is in the closed (BYPASS)
position.
•
Upon completion of filling the GlidePath tank, replace the filler cap and twist to tighten.
•
Wash off any spillage from outside the tank.
•
Close the chemical supply containers and store appropriately. Any empty containers must be thoroughly
rinsed and set aside for collection and disposal in compliance with environmental and work safety
requirements.
Operating Instructions
The GlidePath is started and operated as follows:
•
Confirm the tank contains the required chemical or water quantity.
NOTE! Ensure the pressure regulator is set to the minimum position.
