1800 816 277
www.tti.com.au
12
Product HandBook
DieselPatrol
™
CAUTION! Do not allow the pump to run in bypass mode for more than two (2) minutes.
•
At the dispensing nozzle, squeeze the supply trigger. The nozzle will shut off automatically when the
equipment’s tank is full.
CAUTION! The pump has a maximum duty cycle of 30 minutes of continuous
operation. After 30 minutes, turn the pump to OFF for at least 30 minutes before
next use.
•
After completing the filling operation or 30 minutes of continuous use (whichever comes first), press the
pump’s control switch to OFF.
•
Return the hose and nozzle to its stowed position, retracting the hose onto the optional hose reel if fitted.
Figure 5 – Transfer Operation – Electric Pump
Operation – petrol engine powered pump
The DieselPatrol’s petrol pump engine is started as follows:
•
Park the DieselPatrol and tow vehicle near the equipment to be refueled.
•
Open the ball valve on the tank’s discharge line.
•
Remove the DieselPatrol’s hose and nozzle from it’s stowed psoition, then insert the nozzle into the
equipment’s fuel tank.
•
Turn the fuel lever to ON, refer to Figure 6.
•
If the engine is cold, turn the choke lever to ON.
