Transmitter Solutions EIS ENTRY-CR, Руководство пользователя

Страница: 16 / 23

EIS ENTRY-RX
USER MANUAL
Page 14
8.4 CALLER ID ACCESS
Caller ID access is a very simple way to control relay output defined in Caller ID output setting.
User will by calling in the EIS unit trigger defined output.
Settings for this function are found in the
Caller id # tab.
Figure 6: WEB Server-Caller ID Access
General settings:
•
Caller ID security mode: User can select between 3 options:
Caller ID Disabled
deactivates caller ID function – all numbers are restricted
Caller ID for specific users
will limit the caller ID function only to the numbers on the list.
Caller ID always ON
will allow all user that know the number of the unit to open defined
output. In last option the user doesn’t need to be on the list to trigger the output
•
Caller ID output: Selecting the output that will be triggered in Caller ID function.
NOTE
Selection
Caller ID always ON
will allow anybody with the knowledge of the
unit number to trigger the output by calling the unit. Use this setting with
caution.