TNIC
6
21
Adapter Card
Twisted Pair Connector/10BaseT Connection
To connect 10BaseT Cable to TNIC Adapter Card RJ-45 connectors:
1. Locate or build 10BaseT cables with the following
characteristics:
•
803.2 compliant (See page 14)
•
correct (straight through) cable configuration for site
installation (See page 6)
•
male RJ-45 plug connectors installed at both cable ends.
2. Connect male RJ-45 plug connector at one end of 10BaseT
cable to TNIC Adapter Card RJ-45 jack connector.
3. Connect male RJ-45 plug connector at other end of 10BaseT
cable to DCE hub RJ-45 jack connector (using straight through
cable orientation)
Straight-through 10BaseT
Automatic The Automatic selection displays system compatible
settings.
Custom The Custom selection displays the current TNIC card’s settings
and allows the user to choose system compatible settings.
Drivers The Drivers selection of the INSTALL utility is used to install
the software drivers. Depending on the operating system, the utility
allows the user to select a default path or specify the destination.
Diagnostics The Diagnostics selection of the INSTALL utility is used to
determine TNIC adapter card installation failures. The utility will
determine: (1) if the system conflicts with the TNIC adapter card’s
settings and (2) if the TNIC adapter card is connected to the Local Area
Network (LAN).
Exit The Exit selection of the INSTALL utility quits the program.
Help The Help selection of the INSTALL utility displays screen specific
information to aid in making selections. The following three help levels
are always available:
Button Help
Displays button and field description text
F1 Help
Displays information about a selected field.
Dynamic Help
Displays a one-line message at the bottom
of the screen when the mouse cursor passes
over the selectable item.
Although the INSTALL utility supports a mouse, a key map is provided
below to navigate through the utility without a mouse.
Key
Function
ESC
Exit the configuration or help screen
F1
Help
Tab
Move the cursor to the next position
Left/Right arrows
Move the cursor left or right
<Shift> Tab
Move the cursor to the previous position
Up/Down arrows
Move the cursor up or down
ENTER
Select (Highlight)
Space bar
Select (Highlight)
<Alt> Hot Keys
Select (Functions)
