TNIC
Adapter Card
8
19
Female AUI Connector/10Base5 or Transceiver
Connection
The female AUI connector attaches to 10Base5 through an AUI drop
cable or to 10Base2, 10BaseT, or10BaseFL through a transceiver.
Connecting 10Base5 Using AUI
Drop Cable
To connect 10Base5 Cable to female
AUI connector:
1. Locate or build IEEE 802.3
compliant AUI drop cable.
2. Connect AUI drop cable
male DB-15 connector to the AUI connector.
3. Connect AUI drop cable female DB-15 connector to AUI port
on a transceiver or media attachment unit (MAU).
INSTALL Custom Card Configuration Window
The INSTALL utility detects and displays the following information in
the Custom Card Configuration Window:
•
Card Name
•
Bus Type
•
Ethernet Address
•
Card Configuration
•
Port Mode
•
I/O Address
•
DMA Channel (default)
•
IRQ Level (default)
•
Boot ROM Address
The TNIC-1500x adapter cards require the user to set the appropriate
jumpers on the adapter card. After setting the jumpers and inserting the
card, the user must enter the I/O address, DMA Channel, and IRQ
Level in the Custom Card Configuration Window. The INSTALL utility
will not determine the actual settings for the adapter card but instead
will display the default values. The displayed values and the actual
values must match.
Drivers
Configure
Main
X
Exit
?
Help
I/O Address
DMA Channel
IRQ Level
Boot ROM Address
I* 0x0320
* 5
* 3
* DISABLE
Custom Card Configuration Window
Card Name
Bus Type
Ethernet Address
Select Card and Fill in Desired Configuration Values
Green Values are recommended; Red's unavailable; Blue's Available. Current has *.
Select Configure to Accept Current Values and Configure Card
Instructions
TNIC-1500x
BISA/EISA
00:00:00:00:00:00
Card Configurations
Automatic Port Selection
10Base2 (BNC)
PnP Configuration
Manual Configuration
Port Modes
Connecting to Network Using Transceiver
To connect to network using transceiver:
1. Locate IEEE 802.3 compliant transceiver with male AUI DB-15
connector and correct network media connector.
2. Connect transceiver male AUI DB-15 connector to the 8-Port
10BaseT female AUI connector.
3. Connect transceiver network media connector to the network
media.
T
O
F
IBER
, C
OAX
,
O
R
T
WISTED
P
AIR
