Compliance Information
EN55022 Class A & B + EN55024; CE Mark
FCC Regulations:
This equipment has been tested and found to comply with the limits for a
Class A & B digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be required
to correct the interference at the user's own expense.
Canadian Regulations:
This digital apparatus does not exceed the Class A & B limits for
radio noise for digital apparatus set out on the radio interference regulations of the Canadian
Department of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la Class A & B prescrites dans le Règlement sur le
brouillage radioélectrique édicté par le ministère des Communications du Canada.
CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE
PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in
damage to the public telephone network.
Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EG-
Mitgliedstaaten verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der
Richtlinie 91/263/EWG zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über
Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer
Konformität.
Declaration of Conformity
Name of Mfg:
Transition Networks
6475 City West Parkway, Minneapolis MN 55344 U.S.A.
Model:
xRMFE10xx-20x Series Media Converters
Part Number(s):
CRMFE1011-200, CRMFE1013-200, CRMFE1014-200, CRMFE1015-200,
CRMFE1016-200, CRMFE1017-200, CRMFE1018-200, CRMFE1019-200 CRMFE1025-200,
CRMFE1029-200, CRMFE1029-201, CRMFE1029-202, CRMFE1029-203, CMFE1039-200
SRMFE1011-200, SRMFE1013-200, SRMFE1014-200, SRMFE1015-200, SRMFE1016-200,
SRMFE1017-200, SRMFE1018-200, SRMFE1019-200, SRMFE1025-200, SRMFE1029-200,
SRMFE1029-201, SRMFE1029-202, SRMFE1029-203, SMFE1039-200
Regulation:
EMC Directive 89/336/EEC
Purpose: To declare that the
xRMFE10xx-20x
to which this declaration refers is in conformity
with the following standards.
CISPR 22: 1993; EN 55022:1998 A1:2000 Class A & B; EN 55024: 1998; FCC Part 15 Subpart
B; EN 61000-3-2:2000; EN 61000-3-3: 1995 A1:2001; 21CFR subpart J
I, the undersigned, hereby declare that the equipment specified above conforms to the above
Directive(s) and Standard(s).
Setptember 16, 2005
Stephen Anderson, Vice-President of Engineering
Date
Trademark Notice
All trademarks and registered trademarks are the property of their respective owners.
Copyright Restrictions:
© 2003-2005 Transition Networks. All rights reserved. No part of
this work may be reproduced or used in any form or by any means - graphic, electronic, or
mechanical - without written permission from Transition Networks.
Printed in the U.S.A.
33268.E