CRMFE10xx-20x / SRMFE10xx-20x
12
24-hour Technical Support:
1-800-260-1312
International:
00-1-952-941-7600
Cable Specifications
-- Continued
The physical characteristics must meet or exceed IEEE 802.3™ specifications.
Fiber Cable -- Continued
CRMFE1029-200, SRMFE1029-200
1310nm TX/1550nm RX single mode
Fiber-optic Transmitter Power:
min: -13.0 dBm
max: -6.0 dBm
Fiber-optic Receiver Sensitivity:
min: -32.0 dBm
max: -3.0 dBm
Link Budget:
19.0 dB
CRMFE1029-201, SRMFE1029-201
1550nm TX/1310nm RX single mode
Fiber-optic Transmitter Power:
min: -13.0 dBm
max: -6.0 dBm
Fiber-optic Receiver Sensitivity:
min: -32.0 dBm
max: -3.0 dBm
Link Budget:
19.0 dB
CRMFE1029-202, SRMFE1029-202
1310nm TX/1550nm RX single mode
Fiber-optic Transmitter Power:
min: -8.0 dBm
max: -3.0 dBm
Fiber-optic Receiver Sensitivity:
min: -33.0 dBm
max: -3.0 dBm
Link Budget:
25.0 dB
CRMFE1029-203, SRMFE1029-203
1550nm TX/1310nm RX single mode
Fiber-optic Transmitter Power:
min: -8.0 dBm
max: -3.0 dBm
Fiber-optic Receiver Sensitivity:
min: -33.0 dBm
max: -3.0 dBm
Link Budget:
25.0 dB
CRMFE1039-200, SRMFE1039-200
1550nm TX/1310nm RX multimode
Fiber-optic Transmitter Power:
min: -19.0 dBm
max: -14.0 dBm
Fiber-optic Receiver Sensitivity:
min: -30.0 dBm
max: -14.0 dBm
Link Budget:
11.0 dB
The fiber optic transmitters on this device meet Class I Laser safety
requirements per IEC-825/CDRH standards and comply with 21 CFR1040.10
and 21CFR1040.11.
Copper Cable
Category 5:
Gauge:
24 to 22 AWG
Attenuation:
22.0 dB /100m @ 100 MHz
Maximum Cable Distance:
100 meters
• Straight-through
OR
crossover cable may be used.
• Shielded (STP)
OR
unshielded (UTP) twisted-pair may be used.
• Pins
1&2
and
3&6
are the two active pairs in an Ethernet network .
• RJ-45 Pin-out: Pin 1 = TD+, Pin 2 = TD-, Pin 3 = RD+, Pin 6 = RD-
• Use only dedicated wire pairs for the active pins:
(e.g., blue/white & white/blue, orange/white & white/orange, etc.)
•
Do not
use flat or silver satin wire.
Crossover Cable
1
2
3
6
Straight-Through Cable
Twisted Pair #1
Twisted Pair #1
Twisted Pair #2
Twisted Pair #2
1
2
3
6
1
2
3
6
1
2
3
6
-- Click the
“Transition Now”
link for a live Web chat.
13
Technical Specifications
For use with Transition Networks Model CRMFE10xx-20x and SRMFE10xx-20x.
Standards:
IEEE 802.3™, 2000
Data Rate:
100 Mb/s
Power Consumption:
3.8 W, 320 mA @ 11.88VDC
CRMFE10xx-20x:
Case Dimensions:
3.4" x 0.87" x 5.0" (86 mm x 22 mm x 127 mm)
Weight:
4 oz (113 g) (approximate)
MTBF
483,000 hours
(MIL217F2 V5.0) (MIL-HDBK-217F)
1,344,000 hours (Bellcore7 V5.0)
SRMFE10xx-20x:
Case Dimensions:
3.25" x 1" x 4.7" (83 mm x 25 mm x 119 mm)
Weight:
9.6 oz (278 g) (approximate)
MTBF
49,000 hours
(MIL217F2 V5.0) (MIL-HDBK-217F)
123,000 hours (Bellcore7 V5.0)
Power Supply:
12VDC, 0.5 A (North America)
12VDC, 0.41A (Europe, Japan, Latin America)
12VDC, 1.25A (Australia, N.Z., S. Africa, UK)
Environment:
Tmra*: 0° to 50°C (32° to 122°F)
Storage Temperature: -15° to 65°C (5° to 145°F)
Humidity: 5 to 95%, non condensing
Altitude: 0 to 10,000 feet
Warranty:
Lifetime
*Manufacturer’s rated ambient temperature: Tmra range for the CRMFE10xx-20x
depends on the Transition Networks PointSystem™ chassis in which this Slide-
In-Module will be installed.
The information in this user’s guide is subject to change. For the most up-to-date
information on the CRMFE10xx-20x / SRMFE10xx-20x media converter, view the
user’s guide on-line at: www.transition.com.
Product is certified by the manufacturer to comply with DHHS Rule 21/CFR,
Subchapter J applicable at the date of manufacture.
CAUTION:
Visible and invisible laser radiation when open. Do not stare into
beam or view directly with optical instruments.
CAUTION:
Use of controls, adjustments or the performance of procedures other
than those specified herein may result in hazardous radiation exposure.