16
CMEFG10xx-1xx / SMEFG10xx-1xx
24-hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
Cable Specification -- continued
Fiber cable
(DMI models)
CMEFG1013-110, SMEFG1013-110
850 nm multimode
Fiber Optic Transmitter Power:
min: -10.0 dBm
max: -4.0 dBm
Fiber Optic Receiver Sensitivity:
min: -17.0 dBm
max: 0.0 dBm
Link Budget:
7.0 dB
CMEFG1014-110, SMEFG1014-110
1310 nm single mode
Fiber Optic Transmitter Power:
min: -9.0 dBm
max: -3.0 dBm
Fiber Optic Receiver Sensitivity:
min: -21.0 dBm
max: -3.0 dBm
Link Budget:
12.0 dB
CMEFG1015-110, SMEFG1015-110
1310 nm single mode
Fiber Optic Transmitter Power:
min: -5.0 dBm
max: -0.0 dBm
Fiber Optic Receiver Sensitivity:
min: -24.0 dBm
max: -3.0 dBm
Link Budget:
19.0 dB
CMEFG1029-110, SMEFG1029-110
1310(TX)/1490(RX) nm single mode
Fiber Optic Transmitter Power:
min: -8.0 dBm
max: -3.0 dBm
Fiber Optic Receiver Sensitivity:
min: -22.0 dBm
max: -3.0 dBm
Link Budget:
14.0 dB
CMEFG1029-111, SMEFG1029-111
1490(TX)/1310(RX) nm single mode
Fiber Optic Transmitter Power:
min: -8.0 dBm
max: -3.0 dBm
Fiber Optic Receiver Sensitivity:
min: -22.0 dBm
max: -3.0 dBm
Link Budget:
14.0 dB
CMEFG1029-112, SMEFG1029-112
1310(TX)/1490(RX) nm single mode
Fiber Optic Transmitter Power:
min: -3.0 dBm
max: +2.0 dBm
Fiber Optic Receiver Sensitivity:
min: -23.0 dBm
max: -3.0 dBm
Link Budget:
20.0 dB
CMEFG1029-113, SMEFG1029-113
1490(TX)/1310(RX) nm single mode
Fiber Optic Transmitter Power:
min: -3.0 dBm
max: +2.0 dBm
Fiber Optic Receiver Sensitivity:
min: -23.0 dBm
max: -3.0 dBm
Link Budget:
20.0 dB
[email protected] -- Click the “Transition Now” link for a live Web chat.
17
Optional Accessories for the SMEFG10xx-1xx media converter
(sold separately).
Part #
SPS-1872-
SA
Optional External Power Supply; 18-72VDC Stand-Alone
Output: 12.6VDC, 1.0 A
WMBL
Optional Wall Mount Brackets; Length: 4.0 in.
(102mm)
WMBV
Optional Vertical Mount Bracket; Length: 5.0 in.
(127mm)
WMBD
Optional DIN Rail Mount Bracket; Length: 5.0 in.
(127mm)
WMBD-F
Optional DIN Rail Mount Bracket
(flat);
Length: 3.3in.
(84mm)
Cable Specification -- Continued
Copper cable
Category 5:
(minimum requirement)
Gauge:
24 to 22 AWG
Attenuation:
22.0 dB /100m @ 100 MHz
Maximum Cable Distance:
100 meters
• Straight-through (MDI) or crossover (MDI-X) cable may be used.
• Shielded twisted-pair (STP) or unshielded twisted-pair (UTP) may be used.
• All pin pairs (1&2, 3&6, 4&5, 7&8) are active in a gigabit Ethernet network.
• Use only dedicated wire pairs for the active pins:
(e.g., blue/white & white/blue, orange/white & white/orange, etc.)
• Do not use flat or silver satin wire.
Product is certified by the manufacturer to comply with DHHS Rule 21/CFR,
Subchapter J applicable at the date of manufacture.
CAUTION: Visible and invisible laser radiation when open. Do not stare into
beam or view directly with optical instruments.
CAUTION: Use of controls, adjustments or the performance of procedures other
than those specified herein may result in hazardous radiation exposure.
The fiber optic transmitters on this device meet Class I Laser safety requirements
per IEC-825/CDRH standards and comply with 21 CFR1040.10 and
21CFR1040.11.
Description
