Transition Networks SM24-1000SFP-AH, Руководство по установке

Страница: 32 / 76

2-6
Network Planning
2
Application Notes
1. Full-duplex operation only applies to point-to-point access (such as when a
switch is attached to a workstation, server or another switch). When the switch
is connected to a hub, both devices must operate in half-duplex mode.
2. To interconnect distinct VLANs or IP subnets, you can attach the switch to a
standard Layer 3 router. For network applications that require routing between
dissimilar network types, attach the switch to a multi-protocol router.
3. As a general rule, the length of fiber optic cable for a single switched link should
not exceed:
• 1000BASE-SX: 550 m (1805 ft) for multimode fiber, duplex fiber
• 1000BASE-LX: 10 km (6.2 miles) for single-mode fiber, duplex fiber
• 1000BASE-LH: 40 km (24.9 miles) for single-mode fiber, duplex fiber
• 10GBASE-SR: 300 m (984 ft) for single-mode fiber, duplex fiber
• 10GBASE-LR: 10 km (6.2 miles) for single-mode fiber, duplex fiber
• 10GBASE-ER: 40 km (24.85 miles) for single-mode fiber, duplex fiber
• 1000BASE-BX10-U: 10 km (6.2 miles) for single-mode fiber, simplex fiber
However, power budget constraints must also be considered when calculating
the maximum cable length for your specific environment.