Transition Networks
SISPM1040-3xxx-L Install Guide
33762 Rev. D
Page
5
of
50
Chapter 1 - Introduction
The SISPM1040-3xxx-L switches are next-generation rack mount industrial grade Ethernet switches offering
powerful L2 and basic L3 features with advanced functionality and usability. In addition to extensive management
features, the SISPM1040-3xxx-L also provide Carrier Ethernet features such as OAM, CFM, ERPS, EPS, and PTPv2
which makes it suitable for industrial and Carrier Ethernet applications.
The
SISPM1040-3248-L
is a managed Hardened PoE+ Switch provides (24) 10/100/1000 PoE+ ports, 4 100/1000
dual speeds SFP ports with additional (4) 1G/10G SFP+ slot, it supplies up to 370W PoE budget over 24 PoE+
ports.
The
SISPM1040-3166-L
is a managed Hardened PoE+ Switch provides (16) 10/100/1000 PoE+ ports, 4 100/1000
dual speeds SFP ports with additional (2) 1G/10G SFP+ slot, it supplies up to 250W PoE budget over 16 PoE+
ports.
Key Features
⚫
DMS (Device Management System) built in
⚫
Compliant with IEEE 802.3af PoE and 802.3at PoE+
⚫
PoE Configuration, PoE Scheduling, PoE Power Delay, and PoE Auto Power Reset
⚫
IEEE 1588v2 PTP (TC)
⚫
IEEE 802.3ah OAM and IEEE 802.1ag CFM
⚫
ITU-T Y.1564 (RFC2544) Ethernet Service Activation Test
⚫
ITU-T G.8031 Ethernet Linear Protection Switching (EPS)
⚫
ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
⚫
DHCP Server, DHCP per Port, DHCP Relay, and DHCP Snooping
⚫
IPv4/IPv6 L3 Static route
⚫
SCP (Secure Copy Protocol)
⚫
Shared and Independent VLAN Learning (SVL and IVL)
⚫
Rapid Ring, MRP, and MRP Rings
Benefits
⚫
Feature-rich Carrier Ethernet Switch for Metro
Ethernet
: The switch delivers advanced functionality
including IEEE 1588v2, OAM, CFM, etc. It also has enhanced security features such as IP source guard
and Access Control List to guard your network from unwanted or unauthorized access.
⚫
Exceptional Precision with IEEE 1588v2 (TC)
: The switch performs IEEE1588v2 with transparent clock
capability, implementations in hardware, so there is no performance penalty on packet processing.
The hardware architecture ensures low latency and high time accuracy, which is critical for delay-
sensitive financial and mobile applications.
⚫
ITU-T G.8032 (ERPS)
: Ethernet Ring Protection Switching (ERPS) is an effort at ITU-T under G.8032
Recommendation to provide sub-50ms protection and recovery switching for Ethernet traffic in a ring
topology and at the same time ensuring that there are no loops formed at the Ethernet layer.
⚫
Superior reliability via OAM and CFM for Service Assurance
: Service assurance is provided through a
rich feature set of operations, administration, and maintenance (OAM) functionalities. This Ethernet
access device also offers standards-based fault and performance management in adherence with 1731
PM and 802.1ag connectivity fault management (CFM) standards. It comes with RFC 2544 and Y.1564
support and includes both traffic generation and traffic reflection. These features significantly reduce
operational expenditures and allow for troubleshooting without expensive truck rolls.