Transition Networks
SISPM1040-3xxx-L Install Guide
33762 Rev. D
Page
29
of
50
Power Disconnection
:
To disconnect power from the switch after a successfully boot:
1.
Turn off power to the
switch.
2.
Disconnect the cables.
Connecting the AC Power Cord
The SISPM1040-3xxx-L ships with one standard Power Supply installed.
You can order one AC Power cord as a
separate option.
1.
Connect the AC power cord to the AC power receptacle of switch.
2.
Connect the other end of the AC power cord to the AC power outlet.
3.
Check the
SYS
LED. If it is On, the power connection is correct.
ATTENTION
:
This case must be earth grounded.
No DC input may be earth grounded.
Use Isolated Power Supply.
WARNING
:
Hot Surface Do Not Touch.
