Transition Networks
SISGM
–CHAS L2/L3 Switch User Guide
33625 Rev. B
Page
56
of
234
It may be necessary to add a static route if a default gateway is
required or if the device does not reside within the same network.
Routing can then be enabled at
System
>
IP
>
IP
Configuration
.
A default route (AKA,
gateway of last resort
) is the network route used
by a router when no other known route exists for an IP packet's
destination address (
Network
=
0.0.0.0
,
Mask Length
=
0
,
Gateway
10.0.1.1
as shown above).
Next Hop VLAN
The VLAN ID (VID) of the next hop VLAN.
Add Route
Click to add a row to the table to configure another route.
Add Interface
Click to add a row to the table to configure another interface.
Save
Click to save changes.
Reset
Click to undo any changes made locally and revert to previously saved
values.
