Transition Networks SGPAT1013-105 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 49

Transition Networks SGPAT1013-105 Скачать руководство пользователя страница 47

Transition Networks

SGPAT10xx-x05 PoE+ Converter User Guide

33719 Rev. C

https://www.transition.com

Page

47

of

49

7. Service, Warranty, and Compliance Information

Declaration of Conformity

CE Mark

FCC regulations

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be
required to correct the interference at the user’s own expense.

Canadian regulations

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the radio
interference regulations of the Canadian Department of Communications.
Le interfe appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils
numériques de la Class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des
Communications du Canada.

European regulations
Warning

This is a Class A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

Achtung !

Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb dieses Gerätes
Rundfunkstörungen auftreten. In diesem Fäll is der Benutzer für Gegenmaßnahmen verantwortlich.

«
...
45
46
47
48
49
»

Содержание SGPAT1013-105


















































Отзывы:

Нет отзывов