Transition Networks
SGPAT10xx-x05 PoE+ Converter User Guide
33719 Rev. C
https://www.transition.com
Page
31
of
49
Flow Control (f Command)
This command lets you view and enable or disable SGPAT Flow Control for the port specified in the command.
f
– Flow Control {PORT 1-4} {Disable: 0 | Enable: 1}
Type
f
and press the Enter key on the keyboard to display the current stored flow control setting.
Type
f10
and press the Enter key to disable flow control on port 1.
Type
f11
and press the Enter key to enable flow control on port 1.
Type
f20
and press the Enter key to disable flow control on port 2.
Type
f21
and press the Enter key to enable flow control on port 2.
Type
f30
and press the Enter key to disable flow control on port 3.
Type
f31
and press the Enter key to enable flow control on port 3.
Type
f40
and press the Enter key to disable flow control on port 4.
Type
f41
and press the Enter key to enable flow control on port 4.
Operation is the same on all models.
f Command Example:
f
– Flow Control {PORT 1-4} {Disable:0 | Enable:1}
example: f10 – FC Port 1 Disable, f21 – FC Port2 Enable
%
f
Flow Control Status
Port 1:Enabled
Port 2:Enabled
Port 3:Disabled
Port 4:Disabled
%
f?
Flow Control Status
Port 1:Disabled
Port 2:Disabled
Port 3:Disabled
Port 4:Disabled
%f11
Flow Control Mode Stored
%