10
SAPTF33xx-1xx
24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
Installation —
Continued
Installing cables: standard configuration
Note:
Unit B must be set for Standard Configuration.
Install fiber cable
1.
Locate a fiber cable with male, two-stranded TX to RX connectors installed at
both ends.
2.
Connect the fiber cables to Unit A
(SAPTF33xx-105)
module as described:
•
Connect the male TX cable connector to the female TX port.
•
Connect the male RX cable connector to the female RX port.
3.
Connect the fiber cables to Unit B
(SAPTF33xx-115
) moduleas described:
•
Connect the male TX cable connector to the female RX port.
•
Connect the male RX cable connector to the female TX port.
Figure 8: Connecting Fiber Cable from Unit A to Unit B
Copper
ACT
SDF
PWR
TX
RX
ACT
SDF
PWR
TX
RX
Unit A
Unit B
11
[email protected] Click the “Transition Now” link for a live Web chat.
Installation —
Continued
Installing cables: standard configuration — continued
Install copper cable
1.
Locate a copper cable with male, RJ-11C connectors installed at both ends.
2.
Connect the copper cable to Unit A
(SAPTF33xx-105)
module as described:
•
Connect the RJ-11C connector at one end of the cable to the RJ-11C port
on the Unit A module.
•
Connect the RJ-11C connector at the other end of the cable to the RJ-11C
telephone line wall jack or FXS.
3.
Connect the copper cables to Unit B
(SAPTF33xx-115)
module as described:
•
Connect the RJ-11C connector at one end of the cable to the RJ-11C port
on the Unit B module.
•
Connect the RJ-11C connector at the other end of the cable to the RJ-11C
port on the telephone terminal equipment or FXO.
Copper
RJ-11C
CO or FXS
105
Unit A
Figure 9: Connect Copper Cable from 105 Module to Wall Jack or FXS
Copper
115
RJ-11C
Telephone
or FXO
Unit B
Figure 10: Connect Copper Cable from 115 Module to Telephone or FXO