Transition Networks
PS-DC-DUAL-5624T Power Supply Install Guide
33788 Rev. D
Page
12
of
18
Mounting
Desktop
: You can attach the four adhesive-backed rubber feet to the bottom of the power supply for desktop mounting.
DIN Rail
: The power supply ships with a rack DIN rail bracket attached.
Caution
: If mounted in a NEMA rated enclosure,
either vertical direction is allowed. In a standard 19” rack, the side holes must face upward. To attach the power supply
to a DIN rail:
1.
General caution for Thermals: Make sure there is at least 2 inches of open space outside of at least one of the two
vented sides. See below.
2.
Hang the top of the DIN rail bracket on the DIN rail.
Caution
: The DIN Rail Spring Clip must be facing upwards, as
shown below.
3.
Click the bottom of the DIN rail bracket onto the DIN rail.
Grounding
Connecting POWER OUTPUT
Use 14 AWG stranded or better wire (typ.) to connect to 56 VDC@315W.
Use 20 AWG stranded or better wire (typ.) to connect to 24 VDC@30W.
Refer to the powered device documentation for specific connection information; see the
Related Manuals
section below.
Connecting AC INPUT
Connect the male end of the provided AC power cord
to the power supply AC input first, and then connect the other end
to a live 3-prong outlet.
