E-100BTX-FX-N-02 / E-100BTX-FX-NLP-02
6
Tech Support: 1-800-260-1312 International: 00-1-952-941-7600 (24 hours)
Technical Specifications
For use with models E-100BTX-FX-N-02 or E-100BTX-FX-NLP-02 or equivalent.
Standards:
IEEE 802.3™
Data Rate:
100 Mb/s
Dimensions:
(-NLP)
3.154" x 5.280" x 0.932"
(80 mm x 134 mm x 24 mm)
Dimensions:
(-N)
4.762" x 5.280" x 0.932"
(121 mm x 134 mm x 24 mm)
Shipping Weight:
3 oz. (91g)
(approximate)
Power Consumption:
600 mA @ 5 VDC
MTBF:
1,034,000 hours
(MIL217F2 V5.0) (MIL-HDBK-217F)
4,735,000 hours
(Bellcore7 V5.0)
Environment:
Tmra*
0 to 50°C
(32 to 122°F)
Storage Temp:
-25 to 85°C
(-13 to 185°F)
Humidity:
5 to 95%, non condensing
Altitude:
0 to 10,000 feet
Warranty:
Lifetime
*Manufacturer’s rated ambient temperature. Tmra range for this slide-in-module depends on the
physical characteristics and the installation configuration of the file server or PC workstation in
which this slide-in-module will be installed.
Product is certified by the manufacturer to comply with DHHS Rule 21/CFR, Subchapter J
applicable at the date of manufacture.
CAUTION:
Visible and invisible laser radiation when open. Do not stare into the beam or view
directly with optical instruments.
CAUTION:
Use of controls, adjustments or the performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Cable Specifications
— Continued
The physical characteristics must meet or exceed IEEE 802.3™ specifications.
Fiber cable
Bit Error Rate:
<10-9
Single mode fiber
(recommended)
:
9 µm
Multimode fiber
(recommended)
:
62.5/125 µm
Multimode fiber
(optional)
:
100/140, 85/140, 50/125 µm
E-100BTX-FX-N-02, E-100BTX-FX-NLP-02
E-100BTX-FX-N-02(SC), E-100BTX-FX-NLP-02(SC)
1300 nm multimode
Fiber Optic Transmitter Power:
min: -19.0 dBm
max: -14.0 dBm
Fiber Optic Receiver Sensitivity:
min: -30.0 dBm
max: -14.0 dBm
Link Budget:
11.0 dB
E-100BTX-FX-N-02(SM), E-100BTX-FX-NLP-02(SM)
1310 nm single mode
Fiber Optic Transmitter Power:
min: -15.0 dBm
max: -8.0 dBm
Fiber Optic Receiver Sensitivity:
min: -31.0 dBm
max: -8.0 dBm
Link Budget:
16.0 dB
The fiber optic transmitters on this device meet Class I Laser safety requirements per IEC-
825/CDRH standards and comply with 21 CFR1040.10 and 21CFR1040.11.
Declaration of Conformity
Name of Mfg:
Transition Networks
10900 Red Circle Drive, Minnetonka MN 55343 USA
Model Numbers:
E-100BTX-FX-N-02, E-100BTX-FX-N-02(SC),
E-100BTX-FX-N-02(SM), E-100BTX-FX-NLP-02, E-100BTX-FX-
NLP-02(SC), E-100BTX-FX-NLP-02(SM)
Purpose: To declare that the E-100BTX-FX-N-02 and E-100BTX-FX-NLP02 to which
this declaration refers is in conformity with the following standards.
EMC Directive 2004/108/EC; EN 55022:2006+A1:2007 Class A; EN55024:1998+A1:2001+A2:2003;
EN61000-3-2; EN61000-3-3; CFR Title 47 Part 15 Subpart B Class A; Low Voltage Directive:
2006/95/EC; CFR Title 21 Section 1040.10 Class I
I, the undersigned, hereby declare that the equipment specified above conforms to the above
Directive(s) and Standard(s).
[email protected] -- Click the “Transition Now” link for a live Web chat.
7
Troubleshooting
1.
Are both FX and TX LEDs illuminated?
NO
•
Confirm that the media converter is properly inserted into the PC
workstation or the file server.
•
Confirm that the PC workstation or the file server is properly connected to
the power source and is turned on.
•
Contact Tech Support: 1-800-260-1312, Int’l: 00-1-952-941-7600.
YES
•
Proceed to step 2.
2.
Is FX LED illuminated?
NO
•
Check the fiber cables for proper connection.
•
Verify that the TX and RX cables on the media converter are connected to
RX and TX ports, respectively, on the other device.
•
Disconnect and reconnect the fiber cable to restart the initialization
process.
•
Restart the attached device to restart the initialization process.
•
Contact Tech Support: 1-800-260-1312, Int’l: 00-1-952-941-7600.
YES
•
Proceed to step 3.
3.
Is TX LED illuminated?
NO
•
Check the twisted-pair copper cables for proper connection.
•
Disconnect and reconnect the copper cable to restart the initialization
process.
•
Restart the attached device to restart the initialization process.
•
Contact Tech Support: 1-800-260-1312, Int’l: 00-1-952-941-7600.
YES
•
Contact Tech Support: 1-800-260-1312, Int’l: 00-1-952-941-7600.
November 2010
Stephen Anderson, Vice-President of Engineering
Date
