Section IV: FBRM/BFFG Initial Device Setup
Transition Networks
Initial Device setup via telnet
(directly to Device)
To set up the Device initially via telnet directly to the Device, do the following:
Initial setup via
Telnet to
Device
Step
Action
1.
At the command line type:
Telnet nnn.nnn.nnn.nnn
(IP address of the Device)
to
bring up the password prompt, shown in Figure 33.
Figure 33: Password Prompt
Type the case-sensitive username and password
(default is ‘root’ for
both)
.
2.
3.
Press the ENTER key to launch the console prompt, shown in Figure 34.
Figure 34: Console Prompt
Continued on next page
38
