Transition Networks 400, Руководство пользователя

Страница: 10 / 10

Model 0400 8 7 Ethernet™ Pocket Hub™
3. INSTALLATION
NOTE: 0400 Ethernet Pocket Hub Link Integrity cannot be
disabled. All devices connected to the Pocket Hub MUST
have link functions enabled.
To install the 0400 Ethernet Pocket Hub:
• Unpack the 0400 Pocket Hub.
•
Connect 10Base5 Cable to the 0400 Pocket Hub.
• Connect 10BaseT Cable to the 0400 Pocket Hub.
• Connect the 0400 Pocket Hub to power.
Direction is provided in the pages that follow.
Unpacking the 0400 Pocket Hub
The 0400 Ethernet Pocket Hub packing contents should include the
following:
Item Part Number
0400 Pocket Hub E-TBT-HB-0400
Power Supply Adapter 3518, 3517, 3516, 3515, or 3514,
(depending upon power configuration
in country where installed)
User’s Guide 7333
Connecting 10Base5 Cable
NOTE: Up to one-hundred 10Base5 connections can be made in one
segment.
To connect 10Base5 Cable to Pocket Hub female AUI connector:
1. Locate or build IEEE 802.3 compliant AUI drop cable.
2. Connect AUI drop cable male DB-15 connector to the
Pocket Hub AUI connector.
3. Connect AUI drop cable female DB-15 connector to the AUI
port on a transceiver or media attachment unit (MAU).
Connecting 10BaseT Cable
To connect 10BaseT Cable to Pocket Hub RJ-45 connectors:
1. Locate or build 10BaseT cables with the following
characteristics:
•
802.3 compliant (See page 14)
• correct (straight through or crossover) cable configuration
for site installation (See page 6)
• male RJ-45 plug connectors installed at both cable ends.
2. Connect male RJ-45 plug connector at one end of 10BaseT
cable to Pocket Hub RJ-45 jack connector.
3. Connect male RJ-45 plug connector at other end of 10BaseT
cable to DTE terminal RJ-45 jack connector (using straight
through cable orientation) or to Pocket Hub RJ-45 jack
connector (using crossover cable orientation). NOTE:
Examples are provided in the pages that follow.
Ethernet
™
Pocket Hub
™
net
work
s
TR
ANSITIO
N
Mp
ls,
MN
55
344