Transistor Lynx Door Transmitter, Руководство пользователя

Страница: 4 / 40

4
ENGLISH
Connecting alongside the existing
doorbell
The door transmitter can either be fastened using
double-sided adhesive tape or screwed on. Screw
on the door transmitter from the front using the
through screws. Remove the plug for the upper
screw hole. NOTE: two screws on the rear must
be removed before the door transmitter can be
screwed on.
Battery-
powered
doorbell
Transformer
Door transmitter
2A fuse
Mains-
connected
doorbell
230V IN Max 24V OUT
Connection to mains-connected doorbell
1.
2a. 2b.
Connection to battery-
powered doorbell
Connecting to the existing doorbell
The existing doorbell will ring and the receiver in
the Lynx system will send out an alert.
1. Unscrew the door transmitter.
2. Connect the two cables which are attached in
the existing doorbell to the connecting strip in
the door transmitter.
NOTE: This connection requires a transformer which
complies with standard EN 60558-1/60558-2-6
and is fused on the door transmitter side with a 2A
fuse (see figure 2a).
Door
transmitter