manualshive.com logo in svg

TransCore AR2200, Руководство пользователя

Поделиться
Скачать
TransCore AR2200 Скачать руководство пользователя страница 55

7-3

Chapter 7

Range Modulation Sensitivity Adjustment

This chapter explains how to adjust the AR2200 RF Module’s range 
modulation sensitivity to screen unwanted tag signals.

The range modulation sensitivity adjustment feature of the RF module is used to 
screen unwanted tag signals without decreasing RF power. This feature reduces the 
system’s reading range and the difference between peak and continuous read 
sensitivity.

Using the range modulation feature you can independently reduce the receiver 
sensitivity levels for Antenna Port 1 or Antenna Port 0 via two 14-turn continuously 
adjustable potentiometers (one for each antenna port). You can enable the range 
modulation by removing programming jumper J3 (Figure 7-1). Entailing J3 inhibits 
the range modulation.

Figure 7-1  Range Modulation Sensitivity Potentiometers

You can enable or disable the range modulation using the two-position programming 
jumper, J3 (Figure 7-1). Installing the jumper disables the range modulation. 
Removing the jumper enables range modulation.

You can make continuos and independent adjustment for each antenna port via two 
14-turn continuously adjustable potentiometers (one for each port) that are located on 
the I/O Interface (Figure 7-1). The potentiometers specifics are as follows:

•

Antenna Port 1 range modulation sensitivity adjustment: R52 (ANTENNA1)

•

Antenna Port 0 range modulation sensitivity adjustment: R51 (ANTENNA0)

Содержание AR2200





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды