TransCore AR2200, Руководство пользователя

Страница: 33 / 60

Installing the AR2200 RF Module
3-9
To install your RF module for operation in normal mode, follow these steps:
1. Turn off power to the RF module and the reader.
2. Connect wires between the RF module and the reader interface as shown in Table
3-3. Observe the maximum cable lengths shown in Table 3-4.
Table 3-3 Connecting Wires Between the RF Module and the Reader Interface
Table 3-4 Maximum Cable Lengths for Power Wiring
1. Terminate cable shields at the reader end.
2. For AI1301 readers connect the RF module RFGND and RFPWR terminals to
the +12 V RET (-) and +12 V DC terminals, respectively, of the panel terminal
strip.
RF Module Signal AI12XX Terminal
AI1301 RF Interface
Board Terminal
RFGND 43 NA
RFPWR 42 NA
SCTRTNI 43 NA
SCTCTLI 36 NA
RFCTLO 40 10
RFCTL1 41 12
ANCHA1 45 1
ANACA2 46 2
ANCHB1 47 3
ANCHB2 48 4
ANCHC1 49 5
ANCHC2 50 6
Application
Cable Type (or
equivalent)
Maximum Length
Power wiring Belden 9364 120 ft (36.6 m)
Power wiring Belden 9365 200 ft (61.0 m)
Power wiring Belden 9366 300 ft (91.4 m)
Power wiring Belden 9357 500 ft (152.4 m)
Power wiring Manhattan 33867 500 ft (152.4 m)
Signal wiring Belden 9775 500 ft (152.4 m)