Transcend TS-ASL3, Руководство пользователя

Страница: 45 / 63

1. Suspend Mode
2. HDD Power Down
There are three selections for Power Management. Two of them have fixed mode settings.
1. Min. Power Saving:
Minimum power management mode. Inactivity period is defined below:
Suspend Mode = 1 hr. HDD Power Down = 15 min.
2. Max. Power Saving:
Maximum power management mode. Inactivity period is defined below:
Suspend Mode = 1 min. HDD Power Down = 1 min.
3. User Define:
Allows you to set each mode individually. Select the time-out period for each mode
shown above.
•
Video Off Method
Defines the Video Off features.
-Blank Screen:
Only blanks the screen. Use this for monitors without power management and “green”
features.
-V/H SYNC+BLANK:
Blanks the screen and turns off vertical and horizontal scanning.
-DPMS:
The DPMS (Display Power Management System) feature allows the BIOS to control the
video display card if it supports the DPMS feature.
•
VIDEO Off In Suspend
This determines the manner in which the monitor is blanked. Select “Yes” to blank the
monitor when the system enters suspend mode.
•
Suspend Type
Select Suspend Type: “Stop Grant” or “PWR ON Suspend”.
•
MODEM Use IRQ
You can select one of the following interrupt resources for modem use: “N/A”, “3”, “4”, “5”,
“7”, “9”, ”10”, and “11”.
BIOS SETUP
41