Transcend TS-ASL3 Скачать руководство пользователя страница 41

Страница: 41 / 63

•

IDE Primary/Secondary Master/Slave UDMA

Ultra DMA/33/66/100 implementation is possible only if your IDE hard drive can support it,

and if the operating environment includes a DMA driver (Windows 95 OSR2 or higher or a

third-party IDE bus master driver). If both your hard disk drive and your system software can

support Ultra DMA/33/66/100, select “Auto” to enable BIOS support.

•

USB Controller

Select “Enabled” if your system contains a Universal Serial Bus (USB) controller and USB

peripheral(s).

•

USB Keyboard Support

Select “Enabled” if you use a USB Keyboard.

•

Init Display First

This item allows you to decide which to activate first: Onboard VGA/PCI/AGP.

•

AC97 Audio/Modem

If you select “Enabled”, BIOS will detect whether you are using any Audio/Modem devices.

When an Audio/Modem device is detected, the onboard Audio/Modem controller will be

enabled. If you want to use your own Audio/Modem card, set these fields to “Disabled”. If not,

set these fields to “Auto”.

•

IDE HDD Block Mode

Block Mode is also called Block Transfer, Multiple Commands, or Multiple Sector Read/

Write. If your IDE hard drive supports Block Mode (most new drives do), select “Enabled” for

automatic detection of the optimal number of Block Read/Write per sector the drive can

support.

•

Power On Function

- Password: Power On only if you key in the correct password.

- Hot Key: You can use the hot key to Power On the system.

- Mouse Left: Power On with the Mouse Left Button.

- Mouse Right: Power On with the Mouse Right Button.

BIOS SETUP

Содержание TS-ASL3
































































Результаты поиска

Содержание TS-ASL3

Отзывы:

Похожие инструкции для TS-ASL3

Бренды по названию

Популярные бренды

Transcend TS-ASL3, Руководство пользователя

Результаты поиска

Содержание TS-ASL3

Отзывы:

Похожие инструкции для TS-ASL3

Бренды по названию

Популярные бренды