manualshive.com logo in svg

Transcend TS-APR3, Руководство пользователя, Страница: 27 / 60

Поделиться
Скачать
Transcend TS-APR3 Скачать руководство пользователя страница 27

                     BIOS SETUP 

                                 22

In the Award BIOS system, you can use the arrows (     

           

           

           

           

           

           

     ) to highlight an item.  Pressing

the [Enter] key enters the item’s submenu.  The following keys help navigate in Setup.

[Esc]

Main Menu:  Quit and do not save changes into CMOS RAM

Other pages:  Exit current page and return to Main Menu

[PgUp]

Increase the numeric value or make changes

[PgDn]

Decrease the numeric value or make changes

CHAPTER  3  BIOS SETUP

3.1  BIOS Setup

Award BIOS has a built-in Setup program that allows users to modify the basic system

configuration.  This information is stored in CMOS RAM, so it can retain the Setup information

when the power is turned off.  If the CMOS battery fails, these data will be lost.  If that happens,

you must setup your configuration parameters again after replacing the battery.  Refer to Section

1.1, Essential Handling Precautions (Page 1) for instructions on replacing the CMOS battery.

3.2  The Main Menu

As you turn on or reboot the system, the BIOS is immediately activated.  It will read the system

configuration information, and check the system through the Power On Self Test (POST).  During

the POST process, press the [Del] key, to enter the Award BIOS Setup configuration system.

The following screen will appear:

Содержание TS-APR3





























































Отзывы:

Нет отзывов