Transcend TS-APL3 страница 6 Скачать руководство пользователя

Страница: 6 / 59

Please replace your battery only with the same type, or a similar type recommended by the

battery manufacturer. If the battery is replaced incorrectly, there is a risk of a short circuit or

explosion. Used batteries should be disposed of in accordance with the manufacturer’s

instructions and local environmental regulations.

•••••

Electric Screwdrivers

To reduce the risk of damage to the motherboard due to excessive torque, avoid setting

electric screwdrivers above 7.5 kg/cm.

1.2 Checklist: Hardware Required for Setup

It is advisable to have all of these items of hardware available before you unpack your

motherboard from its anti-static packaging and start building your system.

- Computer case and chassis with appropriate power supply.

- Monitor.

- Socket 370 Central Processing Unit (CPU).

- DIMM memory module.

- PS/2 or USB Keyboard.

- PS/2 or USB Mouse.

- Hard Disk Drive.

- Floppy Disk Drive.

- CD-ROM Drive.

- (Optional) External Peripherals: printer, speakers, plotter, modem.

- (Optional) Internal Peripherals: modem, LAN cards.

1.3 Package Contents

This motherboard package should contain the following items. Please check them as soon as

you unpack. If you find any damaged or missing items, please contact your retailer.

- TS-APM3/TS-APL3 motherboard

- 1 x CD-ROM

- 1 x FDD cable

- 1 x Ultra DMA/66 cable

- User ’s Manual

- 1 x External USB connector (Optional)

- 1 x External COM2 connector (Optional)

INTRODUCTION

Содержание TS-APL3




























































Результаты поиска

Содержание TS-APL3

Отзывы:

Похожие инструкции для TS-APL3

Бренды по названию

Популярные бренды

Transcend TS-APL3, Руководство пользователя

Результаты поиска

Содержание TS-APL3

Отзывы:

Похожие инструкции для TS-APL3

Бренды по названию

Популярные бренды