Transcend TS-APL3 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 59

background image

TS-APM3/TS-APL3 Motherboard

Supporting Intel

®

Socket 370 Celeron

TM

/Pentium III

TM

FC-PGA Series Processor

66/100/133 MHz Front Side Bus Frequency
AGP 4X

VIA

®

P6 ProSavage 133 Chipset

Welcome!!
Congratulations on your purchase of this great value motherboard, with its range of special
features and innovative onboard functions, built around the advanced architecture of the new
VIA

®

P6 ProSavage 133 Chipset. More details to follow later in this manual.

Our Website
Please come and visit us at our website on http://www.transcendusa.com/. You’ll find plenty of
interesting information about this and many other quality Transcend products.

Your User’s Manual
This User’s Manual is designed to help end users and system manufacturers to set up and
install the motherboard. All of the information within has been carefully checked for accuracy.
However, Transcend Information, Inc. (hereafter referred to as “Transcend”) carries no
responsibility or liability for any errors or inaccuracies which this manual may contain. This
includes references to products and software. In addition, the information and specifications
are subject to change without prior notice.

Disclaimer
Transcend provides this manual “as is” without any warranty of any kind, either expressed or
implied, including - but not limited to - the implied warranties, conditions of merchantability or
fitness for a particular purpose. Transcend, its management, employees, distributors and
agents are free of liability for any indirect special, incidental or consequential damages, includ-
ing loss of profits, loss of business, etc. This freedom from liability remains in effect even if
Transcend has been advised of the possibility of such damages arising from any defect or error
in this manual or product.

Trademarks
All brands, product names and trademarks mentioned in this document are the property of
their respective owners or companies and are used solely for identification or explanation. It
is Transcend policy to respect all product rights.

Copyright
This manual may not, in whole or in part, be photocopied, reproduced, transcribed, translated
or transmitted, in any form or language, without the prior written consent of the manufacturer,
except for copies retained by the purchaser for personal archiving purposes.

Manual Version: 1.2
Release Date: May, 2001
Copyright © November 2000 Transcend Information, Inc.

«
1
2
3
4
...
»

Содержание TS-APL3




























































Отзывы:

Нет отзывов

Похожие инструкции для TS-APL3

Бренд: Aaeon Страницы: 132

Бренд: Aaeon Страницы: 50

Бренд: Ublox Страницы: 2

Бренд: u-blox Страницы: 24

Бренд: IEI Technology Страницы: 147

Бренд: Micrel Страницы: 14

Бренд: Nematron Страницы: 47

Бренд: Xilinx Страницы: 31

Бренд: ASROCK Страницы: 56

Бренд: Biostar Страницы: 23

Бренд: JS Automation Страницы: 18

Бренд: HONDA marine Страницы: 2

Бренд: Gigabyte Страницы: 74

Бренд: Intel Страницы: 112

Бренд: u-blox Страницы: 24

Supero X9DRW-7TPF

Бренд: Supero Страницы: 119

Бренд: SOYO Страницы: 102

Бренд: SOYO Страницы: 119

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды