•
•
•
•
•
Onboard Parallel Port
Select a logical LPT port name and matching address for the physical parallel (printer)
port.
The choices are: “378/IRQ7”, “278/IRQ5”, “3BC/IRQ7” and “Disabled”.
BIOS SETUP
39
•
•
•
•
•
Onboard Parallel Mode
This field allows you to set the operation mode of the parallel port.
- Normal: Allows normal-speed operation, but in one direction only.
- EPP: Allows bidirectional parallel port operation at maximum speed.
- ECP: Allows DMA and bidirectional operation. It is faster than EPP mode.
- ECP + EPP: Allows normal speed operation in two-way mode.
•
•
•
•
•
ECP Mode Use DMA
Assign DMA channel “1” or “3” to the port for ECP mode operation.
•
•
•
•
•
Parallel Port EPP Type
Select EPP port type “1.7” or “1.9”.
•
•
•
•
•
Onboard Legacy Audio
This field controls the onboard legacy audio related selection. If “Disabled” all of the following
selections will be disabled. Select “Enable” if you want to use onboard audio.
•
•
•
•
•
Sound Blaster
Select “Enable” to use Sound Blaster.
•
•
•
•
•
SB I/O Base Address
Assign Sound Blaster resources. We recommend you leave this field on default.
•
•
•
•
•
SB IRQ Select
Assign Sound Blaster resources. We recommend you leave this field on default.
•
•
•
•
•
SB DMA Select
Assign Sound Blaster resources. We recommend you leave this field on default.
•
•
•
•
•
MPU-401
Select “Enabled” to use the MPU-401 device (Hardware Wave Table) you installed.
