Transcend TS-AKT4 Series Скачать руководство пользователя страница 47

Страница: 47 / 56

3.8 PnP/PCI Configuration Setup

BIOS SETUP

•

PnP OS Installed

This field allows you to use a Plug-and-Play (PnP) operating system to configure the PCI

bus slots instead of using the BIOS. Thus, interrupts may be re-assigned by the OS

when “Yes” is selected. When a non-PnP OS is installed to prevent re-assigning of

interrupt settings, select the default setting of “No”.

•

Reset Configuration Data

Normally, you leave this field on “Disabled”. Select “Enabled” to reset Extended System

Configuration Data (ESCD) if you have just installed a new add-on card and the system

reconfiguration has caused such a serious conflict that the operating system cannot

boot. The setting will automatically be set back to “Disabled” when the system reboots.

•

Resources Controlled By

The Award Plug and Play BIOS can automatically configure all the boot and PnP compatible

devices. If you select “Auto (ESCD)”, all of the Interrupt Requests (IRQs) and DMA

assignment fields will be deactived as the BIOS automatically assigns them.

Transcend Information, Inc.

Содержание TS-AKT4 Series

























































Результаты поиска

Содержание TS-AKT4 Series

Отзывы:

Похожие инструкции для TS-AKT4 Series

Бренды по названию

Популярные бренды

Transcend TS-AKT4 Series, Руководство пользователя

Результаты поиска

Содержание TS-AKT4 Series

Отзывы:

Похожие инструкции для TS-AKT4 Series

Бренды по названию

Популярные бренды